Care And Maintenance - Electrolux ESF 640 Installation And User Instructions Manual

Care and maintenance
CONTENTS: Cleaning the outside of the machine. Cleaning the
spray arms. Cleaning the coarse filter and fine filter. Measures to
take where there is a risk of freezing.
| This section describes how best to look after your machine so that you get the greatest
possible benefit from it with the least possible worries for the longest possible time:
CLEANING THE OUTSIDE OF THE MACHINE
Wipe the machine clean with a damp cloth and a non-
abrasive liquid cleaning agent. Never rinse down the
machine.
The machine cleans itself inside every time you
wash, but there are some parts which may need special
attention now and again to ensure the best possible
washing results.
CLEANING THE SPRAY ARMS
The spray arms rarely need cleaning, but if you
suspect that dirt has got into them, you should rinse
them under running water.
Remove them by undoing the round nut in the
centre.N.B. Undo the nut for the upper spray arm
CLOCKWISE, i.e. the opposite way to usual.
If you are unsure which is the upper or lower
spray arm when you come to re-fit them, look for
the downward facing nozzle which is on the upper
spray arm.
— 17 -