Electrolux ESF 640 Installation And User Instructions Manual page 10

HOW TO LOAD THE MACHINE
First scrape off large remnants of food. You do not
need to rinse the dishes beforehand, but remove all
hard objects (see also note on sand above).
The UPPER RACK is used for cups, glassware,
small dishes and plates, bowls, knives and other long
objects which are not suitable for placing in the
cutlery basket (excessively long objects in the cutlery
basket may obstruct the upper spray arm). Place
cups and glasses upside down, preferably at an angle
so that the water can run off. The upper rack also
contains a retractable cup shelf.
The LOWER RACK is intended for all heavier items
such as plates, large dishes and bowls, saucepans,
casserole dishes etc, but it is sufficiently close-
` meshed for you to be able to place cups, glassware
etc. if you have a large number of items of this type.
You can make room for very large objects by
completely removing the upper rack. Further details
are contained in the section headed "Useful tips".
The CUTLERY BASKET can be moved sideways,
giving you several options for placing large serving
dishes and similar items in the lower rack. If you
wish to, you can lift the cutlery basket out for filling
and emptying. Place the cutlery with the handles
pointing down, provided they are not so narrow and
pointed that they can protrude through the bottom
and prevent the lower spray arm from rotating freely.
Never place sharp knives with the tip pointing up.
Also make sure that longer objects do not obstruct
the upper spray arm. There are different height
levels in the basket to accommodate cutlery of
different lengths. Spread the cutlery out as much as
possible, so that the water reaches it properly. Make
sure in particular that spoons and forks do not nestle
together.
SiG .c
Mi N Ni
' SAN /\ ANMA