Related Manuals for Electrolux ESF6500LOW
Summary of Contents for Electrolux ESF6500LOW
- Page 1 ..................... ESF6500LOW EN DISHWASHER USER MANUAL ESF6500LOX...
-
Page 2: Table Of Contents
12. ENVIRONMENT CONCERNS ..........17 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. -
Page 3: Safety Instructions
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Do not use multi-plug adapters and ex- pliance, carefully read the supplied in- tension cables. structions. The manufacturer is not re- • Make sure not to cause damage to the sponsible if an incorrect installation and mains plug and to the mains cable. - Page 4 Contact the • Do not drink and play with the water in Service to replace the water inlet hose. the appliance. • Do not remove the dishes from the ap- 1.3 Use pliance until the programme is comple- ted.
-
Page 5: Product Description
ENGLISH 2. PRODUCT DESCRIPTION Worktop Water hardness dial Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket... -
Page 6: Control Panel
3. CONTROL PANEL On/off button Delay button Program button Start button Programme indicators Indicators Display Option button Indicators Description Washing phase indicator. It comes on when the washing phase and the rinsing phases operate. Drying phase indicator. It comes on when the drying phase oper- ates. -
Page 7: Programmes
ENGLISH 4. PROGRAMMES Programme Degree of soil Programme Options Type of load phases Normal soil Prewash EnergySaver Crockery and cut- Wash 50 °C lery Rinses Prewash EnergySaver Crockery, cutlery, Wash 45 °C or 70 °C pots and pans Rinses Heavy soil Prewash EnergySaver Crockery, cutlery,... -
Page 8: Options
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com... -
Page 9: Before First Use
ENGLISH 3. Press and hold, at the same time, De- • The display shows the current set- ting. lay and Start until the programme in- Acoustic signal on dicators start to flash. Acoustic signal off 4. Press Delay. • The programme indicators 5. -
Page 10: Manual Adjustment
10 www.electrolux.com You must adjust the water soften- er manually and electronically. Manual adjustment Turn the water hardness dial to the posi- tion 1 or 2. Electronic adjustment • The programme indicator continues to flash. 1. Press the on/off button to activate the •... -
Page 11: Daily Use
ENGLISH 6.3 Filling the rinse aid dispenser Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. - Page 12 12 www.electrolux.com 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of deter- gent in the compartment (D).
-
Page 13: Hints And Tips
ENGLISH Opening the door while the At the end of the programme appliance operates When the programme is completed, the display shows 0:00. If you open the door, the appliance stops. • The phase indicators go off. When you close the door, the appliance continues from the point of interruption. -
Page 14: Care And Cleaning
14 www.electrolux.com • Make sure that the spray arms can Do not use more than the correct move freely before you start a pro- quantity of detergent. Refer to the gramme. instructions on the detergent packaging. 8.3 Using salt, rinse aid and 8.4 Before starting a... -
Page 15: Troubleshooting
ENGLISH To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B). - Page 16 16 www.electrolux.com Problem Possible solution Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with Make sure that the water tap is open. water. Make sure that the pressure of the water sup- ply is not too low.
-
Page 17: Technical Information
ENGLISH • The programme indicators 5. Press Option to change the setting. 6. Press the on/off button to deactivate go off. the appliance and to confirm the set- • The programme indicator ting. continues to flash. 7. Adjust the released quantity of rinse •... - Page 18 18 www.electrolux.com...
- Page 19 ENGLISH...
- Page 20 www.electrolux.com/shop...