Table of Contents
Advertisement
HOW YOUR WATER HEATER WORKS
Note: depending on the booster configuration there may be insufficient stored
energy available for the next peak period if the system is not up to temperature.
Remember, even on cloudy and cold days your heat pump water heater will
heat your stored water.
SUPERIOR MONITORING
The A2W Heat Pump System is supplied with 9 sensors:
1.
Tank temperature sensor
2.
Building flow temperature sensor
3.
Water inlet temperature sensor
4.
Water outlet temperature sensor
5.
Refrigerant suction side temperature (superheat)
6.
Suction pressure transducer
7.
Discharge pressure transducer
8.
Ambient air temperature sensor
9.
Evaporator coil sensor
The output of these sensors are displayed on the user friendly control panel to
ensure correct system operation.
The system can be connected to BMS. Modbus RS485, BACnet MS-TP or
BACnet TCP/IP (Ethernet) is available via interface cards supplied by Rheem.
Contact Rheem for further information on BMS.
18
Advertisement
Table of Contents
