Waste tray
The waste tray can be attached to the machine, and it is
used to catch waste trimmings as you sew.
After completion of work, remove the waste tray.
Slots for attaching tray
Intergated seam guide
The integrated seam guide helps you sew straight, whether
sewing seams or edges. Fabric is placed along the edge of
the guide. The guide is adjustable and can be set for de-
sired seam allowance.
Thread knife
The thread knife is built in, toward the back side of the
face cover. Draw the thread chain toward the rear and cut
off excess threads with the thread knife, as shown.
Changing presser feet
Be sure needle is in the up position.
Foot release lever
Raise presser foot lever.
1. Push foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning
needle holes.
3. Lower the presser foot lever and push foot release
lever so that the foot holder snaps on the foot.
11