US Robotics 3CP5610A Installation Manual

56K 56K P P P P Performance erformance erformance
56K 56K 56K erformance erformance
* * * * *
P P P P P ro Modem ro Modem ro Modem
ro Modem ro Modem
Insert the Installation CD included with your modem into
your CD-ROM drive. It should run automatically. If it does
not, click Windows and then click . In the "Run"
dialog box, type . If your CD-ROM drive uses
a different letter, type that letter in place of "D."
Follow the onscreen instructions. When you see the prompt
to shut down your computer, eject your CD, and refer to
Step One of this Guide to continue the installation process.
Insert the Installation CD included with your modem into
your CD-ROM drive. Follow the onscreen instructions.
Shut down and leave the Installation CD in your CD-ROM
drive. Refer to Step One of this Guide to begin the
installation process.
Before you begin, we recommend you uninstall any other modems
you have in your system. Refer to your old modem's documentation for
instructions.
Write the modem's serial number in the box below. The serial number is
located on the white bar code sticker on the modem and on the modem's
box.
It is very important that you have your serial number written down for
future reference. If you ever need to call our Technical Support department,
you will need this number to receive assistance.
Make sure that your computer is shut down. Turn off your computer and
all peripheral devices. Unplug your computer and remove the computer's
cover. If you currently have an internal modem in your computer, remove
the telephone cord from the modem before removing your computer's
cover.
When your desktop returns, register your modem. At the Installation CD
interface, click the link. Follow the onscreen instructions to register
your modem and to view the warranty information. (If the Installation CD
interface does not run automatically, click Windows and then click
. In the "Run" dialog box, type . If your CD-ROM drive
uses a different letter, type that letter in place of "D.")
Remove the Installation CD and insert the Connections CD. The
Connections CD will start automatically once you have successfully
installed your modem. It will guide you through installing the Connections
program group. If it does not start automatically, click Windows and
then click . In the "Run" dialog box, type . If your CD-
ROM drive uses a different letter, type that letter in place of "D."
If at any time during the installation you are prompted to select the
location of your installation drivers, the following are the correct locations
on the Installation CD (assumes D: is your CD-ROM drive).
D:\Win9x
D:\Win2000
D:\WinNT4
For further troubleshooting information and information on contacting
technical support, see the other side of this Guide.
To avoid the risk of electrical shock, make sure your com-
puter and all peripheral devices are turned off and unplugged.
Remove the screw and expansion slot cover at the back of an empty
PCI expansion slot. You will need this screw later to hold the modem in
place. The slot cover is located on the back of the computer and covers
an opening on the computer case. The opening lines up with the PCI
slot inside the computer, which is 3.5 inches long and usually made of
white plastic lined with metal.
Turn your PC on. Windows will detect your modem and install its
drivers. Reinsert your Installation CD and follow the onscreen
instructions.
Turn your PC on. Double-click the icon. Right-click
the drive icon and select . If your CD-ROM drive uses a
different letter, type that letter in place of "D." Double-click the
folder. Double-click the folder. Double-click . This
will start the Modem Setup Wizard. You can also start the Modem
Setup Wizard by clicking Windows , and pointing to . In
the field, type and click .
When the "Modem Setup" screen appears, click . The "In-
stall Complete" message appears. Click and restart your com-
puter.
Turn your PC on. A "Digital Signature Not Found" screen will ap-
pear. Click . When the "Found New Hardware Wizard" screen
appears, click . Follow the onscreen instructions.
The Installation CD includes communications and fax software and
the electronic User's Guide and Reference for your modem. The
Connections TM CD contains a selection of Internet browsers, ISP
offers, and other valuable software.
To avoid risk of electrical shock, make sure your
computer and all peripheral devices are turned off and unplugged
from electrical outlets. Disconnect any phone cords from the
wall jack.
Insert the modem, gold edge first, into the slot. The modem
should fit snugly into the slot. The modem's metal bracket will
cover the opening on the back of the computer. Secure the
modem with the screw you removed. Replace the computer's
cover. Reconnect and turn on all peripherals.
Plug one end of the provided phone cord into the modem's
jack and plug the other end into an analog phone wall jack.
When you are not using the modem, you can use a telephone by
plugging the telephone's cord into the modem's jack.
For troubleshooting help or to find out how to contact technical
support, see the other side of this Guide.