Advertisement
ra ee
eee
=| Some
f t
pitetee
etal
(a VIDEO INSERT EDITING/ TAPE COPYING
Video. Insert Editing
"You can easily replace a scene ona recorded tape
with another scene by importing a picture and sound
from external equipment.
Recorded
tape
After the
video insert
editing
Preparation
Select the video channel or video input mode on
the TV.
Set the VTR/TV
selector to "VTR".
Select.the line input mode by pressing the INPUT
SELECT button according to your connection.
INPUT
SELECT
Using another VTR or external equipment, you can
copy a tape.
Playing VTR (Another VTR)
AUDIO/VIDEO
(SCART)
Recording VTR
(Your VTR)
"Search for the end point of the portion you want
97 |
to replace by pressing the PLAY buiton.
» _ At the end point, pause the.picture by pressing
a:
the PAUSE/STILL button, and press. the ©
78 |
COUNTER RESET button to set the counter to
™
"OHOOMOO0S".
-
Eta ae
Rewind the tape to the starting point of the
portion you want to replace by pressing the
REW button.
;
At the starting point, play the tape and press the
PAGHE
PAUSE/STILL button to pause the picture.
al
PAUSE/STILL
Press the VIDEO INSERT button.
VIDEO
INSERT
Press the PAUSE/STILL button to start video
;
insert editing, and start playback on the external
equipment.
The recording will automatically stop when the
counter reaches "OHOOMOOS".
TV screen
PAUSE/STILL
o
When-the: DISPLAY button is pressed;
-
RECORD
Press the INPUT SELECT button so that the
VTR display shows "L1".or "L2" depending on
your connection.
;
When using the AUDIO/VIDEO — When using the LINE IN 2
(SCART) socket
phono type jacks (front panel)
Press the SP/LP button to select the recording
tape speed.
Play the tape.on the playback VTR and press
the REC buttons to start recording on this VTR.
Press the STOP button on each VTR when
copying is finished.
copyrights and other rights are not violated.
¢ When monitoring a picture being recorded, press the
TV/VIDEO button to make the "VIDEO" indicator appear
in the VTR display and select the video channel on the TV.
Advertisement
