Advertisement
r
{
Ser, CARE
SOMONE
ESA
aT
CW
i Feb
ed Ss
i
Lee
AF Sem
Ae
ee eS
ae Rees
eee
Laka
ols.
4 : RECORDING FROM A SATELLITE RECEIVER
if you are using a satellite receiver, you can connect it to this VTR to record a satellite programme.
Recording Procedure _ a :
' Preparation
e Turn on the VTR.
* Select the video channel or video input mode on
the TV.
"© Set the VTR/TV
selector to "VTR".
EE
e Make sure your satellite receiver is connected to
the VTR correctly using a SCART cable (page 10),
and turn it on.
Load a cassette with the safety tab attached.
Se q
? Press the TV/VIDEO button so that the "VIDEO"
Fo |
indicator appears in the VTR display.
e
SE MEO)
/
'
TVNIDEO
3 Press the INPUT SELECT button so that "SA"
HE
indicator appears in the VTR display.
Each time you press the INPUT SELECT button,
[Ej
the display changes as follows.
cf TV (position number) L1 — L2 - SA (satellite)
4 Select the desired satellite channel on the
connected satellite receiver.
Make sure that the selected channel is on the
TV.
5 Press the SP/LP button to select the recording
[Py
tape speed.
[soks. PB} vipEo
SP/LP
6 Press the REC button on the VTR, or
simultaneously press the two REC buttons on
the remote controller.
Recording starts.
Be
fers) SP
ange
7 Press the STOP button to stop recording.
eg
"You can watch a satellite programme from your
connected satellite receiver even while the VTR is
- recording a TV programme, or is in the playback or
stop mode.
Important
This function only applies when the TV and the
satellite receiver are connected to the VTR using
the SCART socket.
@ Waitching a satellite programme while recording
- a TV programme
1) While recording a TV programme, press the
ot
SAT.MONI. button.
The "MONI" indicator appears.
SAT.MONI.
SP
,
Gon
VIDEO
my PT
@
|
wh,
2
|
yeh
eer
Each time you press the SAT.MONI. button, the
Em
indicator goes on or off.
2) Choose a desired satellite channel on the
connected satellite receiver.
lf Watching a satellite programme while the VTR —
isin the playback or.stop.mode
1) Press the SAT.MONI. button so that the "MONI" —
indicator appears in the VTR display.
RECO
2) Press the TV/VIDEO button so that the "VIDEO"
indicator appears in the VTR display.
3) Choose a desired satellite channel on the
connected satellite receiver.
Notes
° If you make the on-screen display (ex. MENU screen)
appear on the TV, this function is cancelled.
* The satellite monitor function is also available in the
timer programme recording mode (page 27) or the one-
touch timer recording mode (page 25).
Wi Watching a TV programme while recording a
satellite programme
1) While recording a satellite programme, press
2°]
the TV/VIDEO button so that the "VIDEO"
indicator disappears in the VTR display.
2) Choose a desired TV channel on the TV.
26
Advertisement
