Advertisement
Cee
ornrre
Video Plus+ is a timer recording system for an easier programming that requires you only to enter a PlusCode assigned to a desired
programme. This section explains the necessary set-up to make Video Plus+ recordings
Information
—
You can pérform timer recording very easily using
the Video Plus+ programming system of this VTR.
Before making a Video Plus+ recording, it is
necessary to set GUIDE channels in the VTR.
| GUIDE Channel Setting for TV
C h a n n e l s
Important
There is no need to perform this procedure if the
TV stations have been stored to the position
numbers (1 for BBC1, 2 for BBC2, 3 for ITV and 4
for CHANNEL 4):on the VTR (pages 13 and 14).
Setting The Clock (page 12)
STORING STATIONS ON-THE VTR (page. 13)
|
CONTROL OF SATELLITE CHANNELS (page 29, 30)
Preparation'
* Select the video channel or video input. mode on
the TV.
*« Set the VTR/TV selector to "VTR".
31
(When using a satellite receiver)
Satellite input setting
Brand code setting
GUIDE channel. setting
GUIDE channels for satellite channels are
automatically set when: you choose SKY or
ASTRA.
If you correct the setting, or.if your
satellite receiver is not SKY or ASTRA, use the
procedure explained in "Video Plus+ SET-UP",
Video Plus+ SET-UP (pages 31, 32)
(GUIDE Channel Setting)
GUIDE Channel Seiting for TV Channels
GUIDE Channel Setting for Satellite Channels
Video Plus+ RECORDING (pages 33, 34)
|
Press the OSP button to display the MENU
screen.
Press number button '5 to select "CH
PRESET".
" | B
CH MEMORY
QUIDE..CH SET
ANTENNA
SELECT
(MIX)
'
SATELLITE
SETTING
SATELLITE
!NPUT(
SAT
)
SAT.
BRAND
NO.
(
17 )
SET=)-4
ENO=@5m'}
Press number button 2 to select "GUIDE CH
fa |
SET".
(2)
GUIDE. channels
71; BBC1
4: CHANNEL 4
GUIDE channels 1 to 4 have been factory set to
position numbers 1 to 4 respectively.
Make sure that the numbers are. matched as
above.
Note
;
To:set another TV:channel, select the GUIDE channel
Ed
1
using the SHIFT button, and in the "CH P." column
4
E
enter the position number in which you have stored
the TV station by number buttons.
Press the OSP button three times to exit. .
The GUIDE channel setting for TV channels is
complete.
Now you can make a Video Plus+ recording of
TV programmes.
(Skip to page 33.)
if you use a satellite receiver, make the GUIDE
channel setting for satellite channels as well.
(See the next page.)
Advertisement
