About The Screen Display; About The Indication Of The Effect Select Buttons - Boss GT-5 Owner's Manual

3 Tochange the Group
1 Banks will be called in the sequence as follows by
pressing [GROUP] repeatedly.
» | User Group1
Preset Group6
When you change the Group, the indicator of the previ-
ous Number pedal selected before you pressed [GROUP]
will start flashing, showing that you are in the Patch
Number specifying mode. (At this point, the Patch has not
yet been selected.)
2 Specify the Number of the Patch you wish to use by
pressing the relevant Number pedal.
The indicator for the Number pedal you have pressed
lights, showing that the new Patch is now selected.
(Changing the Group using the VALUE dial)
You can directly select a Group by rotating the Value dial
while holding [GROUP] down.
14
The following types of information are shown in the Play
page.
47 TUBE STACK
About the indication of the Effect
Select Buttons
e
e
fon e S
«OR Vo ae cof S oe use
ons PREAMP sp
KLOWGEAR COMPAM WAH LOOP SIM EQ
EA [i]
TREMOL!
PEDAL
RB MASTER /ASSIGN NAME
MOD DELAY CHORUS WPAN e REVE!
Li]
^ Oc, Ch. Ne. Re,
a?
Rus b
The effect select buttons corresponding to each effect will be
lit or dark to indicate the effect on/off settings of each Patch
number.