About Sleep Mode - Boss AW-3 Dynamic Wah Owner's Manual

About Sleep Mode

When ten hours have elapsed since the last operation or audio
input, the AW-3 will enter sleep mode (power conservation
mode; only the bypass sound will be output).
From sleep mode, you can press the pedal to return to normal
mode.
Disabling Sleep Mode
1. Set the knobs to the positions shown below.
2. While holding down the pedal, turn on the power.
When running on battery power
Insert the connection plug into the GUITAR IN jack or BASS IN
jack.
When running on power from an AC adaptor
Insert the AC Adaptor plug into the DC IN jack.
The CHECK indicator will start blinking.
3. While continuing to depress the pedal, move the
MANUAL knob so it's within the range illustrated
below.
The CHECK indicator will go out.
4. Release the pedal to complete the procedure.
15