TP-Link Archer GE800 User Manual page 39

Be19000 tri-band wi-fi 7 gaming router
Table of Contents

Advertisement

Chapter 7
To enable or disable TWT:
TWT (Target Wake Time) allows 802.11ax routers and clients to negotiate their periods
to transmit and receive data packets. Clients only wake up at TWT sessions and remain
in sleep mode for the rest of the time, which significantly extend their battery life. It is
disabled by default.
1. Go to
Advanced
>
2. Enable TWT.
To enable or disable OFDMA:
OFDMA enables multiple users to transmit data simultaneously, and thus greatly
improves speed and efficiency. Noted that only when your clients also support OFDMA,
can you fully enjoy the benefits. It is disabled by default.
1. Go to
Advanced
>
2. Enable
OFDMA+MU-MIMO
To use the Smart Connect function:
Smart Connect combines the 2.4 GHz and 5 GHz bands and assigns your devices
between them to balance network demands, while leaving the brand-new 6 GHz band
exclusive for your Wi-Fi 6E devices to unleash the most out of the latest Wi-Fi.
1. Go to
Advanced
>
2. Enable
Smart
Connect.
3. Keep the default values or set a new SSID and password, and click SAVE. This SSID
and password will be applied for the 2.4 GHz and 5 GHz wireless networks. If you want
to configure the wireless settings separately for each band, deselect the checkbox
to disable this feature.
To enable or disable the wireless function:
1. Go to
Wireless
or
Advanced
2. The wireless bands are enabled by default. If you want to disable a wireless band, just
deselect its
Enable
To change the wireless network name (SSID) and wireless password:
1. Go to
Wireless
or
Advanced
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
Wireless
>
Wireless
Settings.
Wireless
>
Wireless
Settings.
or
OFDMA
only.
Wireless
>
Wireless
Settings.
>
Wireless
checkbox.
>
Wireless
Network Name (SSID)
>
Wireless
Settings.
>
Wireless
Settings.
and customize the password for the
Wireless Settings
34

Advertisement

Table of Contents
loading

Table of Contents