Local Update; Easymesh Satellite Update - TP-Link Archer GE800 User Manual

Chapter 17
3. Click CHECK FOR UPDATES
a few minutes for the update and reboot to complete.
Tips: If there's a new and important firmware update for your router, you will see the prompt notification on your
computer as long as a web browser is opened. Click to update, and log in to the web management page with the
username and password you set for the router. You will see the
17 1 3

Local Update

1. Download the latest firmware file for the router from www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Advanced >
4. Focus on the Local Update
firmware file, and click UPDATE.
5. Wait a few minutes for the update and reboot to complete.
Note: If you fail to update the firmware for the router, please contact our
17 1 4

EasyMesh Satellite Update

EasyMesh Satellite Update allows you to remotely check and update the firmware of
the satellite devices connected to this router via EasyMesh.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Update section.
3. The router's satellite devices will appear on the table. Click
see whether the latest firmware is released. If you want to update a satellite device,
click on the right of the corresponding device.
Note: The update will take a few minutes and the satellite router will reboot.
to see whether the latest firmware is released. If it is, wait
System > Firmware Update.
section. Click
System > Firmware
Firmware Update page.
BROWSE to locate the downloaded new
Technical Support.
Update, and locate the
CHECK FOR UPDATES
Manage the Router
EasyMesh Satellite
to
117