Set Up The Router As An Access Point - TP-Link Archer AXE5400 User Manual

Chapter 4
7 ) Choose v6plus
8 ) Choose MAP-E(OCN)
5. Click SAVE.
Tips:
• If you use Dynamic IP and
please go to Advanced >
• If you still cannot access the internet, refer to the
4 4

Set Up the Router as an Access Point

The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
SAVE. The router will reboot and switch to Access Point mode.
if you have subscribed v6plus service from your ISP.
if you have subscribed MAP-E service from your ISP.
PPPoE and you are provided with any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
System > Operation
section for further instructions.
Mode, select Access Point Mode
Set Up Internet Connection
and click
18