Install The Mxa901-R On A Ceiling - Shure MXA901-R Manual

Install the MXA901-R on a Ceiling

Use the included surface mount to attach MXA901-R microphones to junction boxes or wood ceiling joists. You can route the
Ethernet cable through the hole in the center of the mount or out the side.
To get started, you will need:
•
Surface mount
•
Round VESA bracket
•
M4 screws (4)
•
Screws to attach surface mount to ceiling (drywall anchors not recommended)*
•
Ethernet cable*
*Not included
Install the surface mount on a junction box or wood ceiling joist using a minimum of 2 screws. Follow any local regula­
1.
tions.
2. Attach the round VESA bracket to the microphone using the 4 included M4 screws.
Shure Incorporated
19/42