Table of Contents
Advertisement
Ceiling Tile Installation
1.
Drill a 1/2 in. hole into the ceiling tile. CAUTION: To avoid tile damage, use a 1/2 in. augur bit and drill very slowly.
2.
Unplug the mini 4-pin connector from the preamp and feed the cable through the hole.
3.
Place the rubber grommet, tip down, over the cable and position it to suspend the microphone at the appropriate height.
4.
Fit the grommet securely into the hole. For 5/8 in. ceiling tile, use the suppled washer.
5.
Reconnect the preamp.
Shure Incorporated
7/16
Advertisement
Table of Contents
