Shure MXA901-R Manual page 10

4. In your videoconferencing software, select the correct microphone and loudspeaker sources.
Step 3: Listen and Adjust
1. Place a test call with the whole system and have the far-end caller tell you how your microphone signal sounds. Make
gain, EQ, or DSP adjustments in the MXA901's IntelliMix tab.
2. If needed, move the microphone's coverage area in the Coverage tab.
You can also listen to the microphone signal directly using a Dante headphone amp
Shure Incorporated
to help make adjustments.
10/42