Install Or Remove The Stand Adapter; Adjust The Frequency Response Switches - Shure SM7B Manual

Shure Incorporated

Install or Remove the Stand Adapter

To mount the microphone on a 3/8 in. stand, insert the included brass stand adapter and tighten it with a coin or screwdriver.
Important: Make sure that the slots on the adapter face outward.

Adjust the Frequency Response Switches

You can use a pen, pencil, or screwdriver to move the switches on the back panel. This adjusts the frequency response.
Note: You can change the switch settings while the mic is in use or plugged in.
7/13