Castors And Brakes; Castor Brake; Operating Side Rails; Operating Scala 2 Side Rail - Invacare Etude Plus User Manual

Bed
Hide thumbs Also See for Etude Plus:
Table of Contents

Advertisement

1. Insert key A in the keyhole located just above the
desired function.
2. To lock, turn the key clockwise.
3. To unlock, turn the key anti-clockwise.

4.3 Castors and brakes

CAUTION!
Risk of trapping/squeezing
All brakes are foot-operated.
– Do not release the brake with the fingers.
CAUTION!
Risk of injury
User can fall, while entering or exiting the bed, if
brakes are not locked.
– Always lock the brakes before the user is
moving in or out of bed or when attending to
the user.
Castors might make marks on different types of
absorbing floor surfaces - such as untreated or
badly treated floors. To prevent marks, Invacare®
recommends to place a suitable kind of protection
between the castors and the floor.

4.3.1 Castor brake

Locking the brake
Step on the outer pedal A.
Unlocking the brake
Push up the release button B.

4.4 Operating side rails

WARNING!
Risk of entrapment or suffocation
There's a risk of entrapment or suffocation
between mattress support, side rail and bed end.
– Always ensure correct fitting and tightening of
the side rails.
60128467-B
A
WARNING!
Risk of falling
If it has been decided that the user needs side
rails:
– Never leave the user unattended in the bed
with the side rail down.
– Make sure the side rail is in its highest position
and properly locked while leaving the user
unattended.
CAUTION!
Risk of Injury
If the side rail is not locked properly it can fall
down.
– Pull/push the top bar of the side rail to ensure
that the locking system is properly engaged.
CAUTION!
Risk of Injury
There is a risk of entrapment or squeezing while
operating the side rail.
– Pay attention to your fingers and body parts
of the patient.
– Never force or drop the side rail while handling
it.

4.4.1 Operating Scala 2 side rail

NOTICE!
– When manoeuvring the side rail, place your
hands only in the areas marked with the grip
label.
1.
1. Up: Lift and pull the top bar B of the side rail towards
the end with the locking mechanism (release button) A
. Ensure, it is locked in place.
2. Down: Press the release button A and push the top bar
B of the side rail away from the locking mechanism.
Operating the bed
2.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Etude plus low

Table of Contents