Changing Recipe Settings - TurboChef i5 Owner's Manual

Changing Recipe Settings

Recipe settings consist of the following:
- Up to eight "events" or stages of the cook cycle.
- Cook time.
To change recipe settings,
1. Place the oven in
EDIT MODE
2. Access the "Food Group" screen (Figures 16-17).
3. Select a recipe to edit (Figure 18).
4. Use the Down key to move the cursor to the
desired "Event Setting" field (Figure 19).
NOTE: To help make navigation easier, the
currently-selected field will be displayed in the
top-right corner of the display. In Figure 19, the
cursor is in the %TIM column.
5. Use the number keys to adjust event settings:
- % Time (0-100% in 1% increments). The
sum of the percentages across eight events
must equal 100.
- % Top Blower (10-100% in 10% incr.)
- % Bottom Blower (10-100% in 10% incr.)
- % Microwave (0-100% in 10% incr.)
6. Use the Down key to move the cursor to the
NOTE: To help make navigation easier, the R4
"Time" soft key jumps the cursor to the total time
(see page 15). field.
7. Use the number keys to adjust the cook time.
8. Press the R3 soft key to save changes.
NOTE: For the save to take effect, the cursor must
be advanced past the field that was last edited.
9. If desired, press the R5 soft key to test-cook
10. When all editing is complete, return to the
"Total Time" field.
the new settings. In doing so, the oven may
require additional warmup time.
"Options" screen and turn off the
(see page 13). This will allow access into the
regular cook mode.
17
EDIT MODE