Auto Play Mode; Auto Return Mode - Fostex DMT-8VL Owner's Manual

DMT-8VL Owner's Manual (Locate function)
2. Auto Play mode
Turn Auto Play mode on before using the Direct Locate function, and the DMT-8vl
will automatically start playback from the located point (except when the ABS END
point Is located). The diagram below illustrates this operation.
To turn Auto Play mode on. press the AUTO PLAY/AUTO RTN key so that the AUTO
PLAY LED will light up. To cancel this mode, press the AUTO PLAY/AUTO RTN key
again so that the AUTO PLAY LED will go off.
.Waft* w (*o» rv<*•* i
3. Auto Return mode
To turn Auto Return mode on. press the AUTO PLAY/AUTO RTN key so that the
AUTO RTN LED will light up.
To use the Auto Return function, first you need to specify the Auto Return Start
point and Auto Return End point.
As shown In the diagram below, the DNfT-BvL will play back data to the Auto Return
End point, then automatically locate the Auto Return Start point, and stop.
LOCATE
88