Smart Guard System Storage - Bosch GTS15-10 Operating/Safety Instructions Manual

Storage, Transportation, and Mounting
Fig. 27
13 13
A
10 10
10 10
Fig. 28
6 6
front of saw front of saw
Fig. 29
17 17
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 26 1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 26
17 17
B
9 9
55 55
58 58
55 55
17 17
10 10
58 58
rear of saw rear of saw

Smart Guard System Storage

cluding the Barrier Guard Assembly, Anti-Kick-
back Device, and Riving Knife, is highly recom-
mended to provide protection against accidents
and injury.
Barrier Guard Assembly Storage
(Fig. 30)
When not in use, store the Barrier Guard Assembly
26 under the right side of the Table 13.
Lock the Barrier Guard Assembly 26 into place in
the Barrier Guard Assembly Storage Position 63 in
the same manner as you would attach it to the Riv-
ing Knife 25 but into the Barrier Guard Assembly
Storage Position's Notch 64
ing the Barrier Guard Assembly" on page 19.)
-26-
Use of all the components of
the Smart Guard System, in-
. (See "Attach-
4/20/2023 11:23:24 AM 4/20/2023 11:23:24 AM