Fisher & Paykel 7 Series User Manual page 23

Out of balance recovery
If an out of balance load is detected, the washer will stop and try to redistribute the load.
To adjust the number of times the washer attempts to re-fill,
can be used.
1
2
3
4
OPTION ADJUSTMENT MODE
OUT OF BALANCE RECOVERY
With the washer on at the wall, but
off at the display, press and hold
and together for 3 seconds.
oPAd will show on the display.
Select using the dial.
SPIN
Press
OPTIMISE WASH
number of recovery cycles to 2 or 3.
Press to save changes and exit
OPTION ADJUSTMENT MODE.
to set the
23