NAMES AND OPERATION
OF THE PARTS
•
Carrying Handle
Accessories (included)
•Cupwheel Printing Element
•Correctable Film Ribbon Cassette
(RP-T132)
• Lift-off Correction Tape
(RP-T131)
• AC Power Cord
• Dust Cover
LCD Contrast Adjuster
(CONTRAST)
This is used to adjust the
contrast of the LCD
Display.
Parallel Interface Connector
This is used to connect a parallel
interface cable to receive data from
a computer for use as a printer.
Refer to pages 64 to 66.
RAM Card Release
Lever
Refer to pages 43 to 46.
- • R A M Card Slot
Refer to pages 43 to 46.
•
Bottom Cover Lid
By sliding this lid to the right,
it can be removed to exchange
the Cupwheel Printing
Element.
Refer to pages 10 and 11.
•
Power Input Jack [AC IN
Power Switch [POWER (ON/I • OFF/O)]
m