Advertisement
Chapter 1
6
Position the new Ribbon Cassette over the
Cassette Holder so that the Window (through
which the ribbon can be seen) is on the top, then
place the Projection on the rear of the cassette
into the Slot at the front of the Cassette Holder.
7
Set the Ribbon between the Carriage Cover and
the Ribbon Guides and then gently press the
front of the cassette with both hands until the
cassette is locked. Turn the Ribbon Feed Wheel
clockwise until a clicking sound is heard.
•With
a new ribbon, turn the Ribbon Feed
Wheel until the black ribbon can be seen.
Wheel
8
Confirm that there is
there is slack, turn
clockwise to remove
no slack in the Ribbon. If
the Ribbon Feed Wheel
it.
Do not apply excessive force to or bend the flat cable
coming out from the Carriage.
Card Holder
Ribbon Guides
Carriage
Cover
Cassette
Holder
Advertisement
Chapters
