Panasonic RK-T55 Operating Instructions Manual page 20

CORRECTION
The Quick Erase feature allows you to correct one
word at a time. Like Automatic Correction, this
feature works only in the correction memory.
TPWR Mode
To erase a character made in a line before the two line
correction memory, perform manual correction.
BACK
SPACE
FWD
4
?
Using the BACK SPACE
Key or FWD Key, move
the Carriage or cursor to
the last character of the
word to be erased.
• If you have pressed the
Space Bar after typing
an incorrect word, make
sure to press the BACK
SPACE Key, before
pressing the QUICK
ERASE Key.
Press the QUICK ERASE
Key.
The word will be erased.
3 Type the correct word.
REV
INDEX
Space Bar
BACK
SPACE
TAB
i
O T A B
MICRO
SPACE
<3
Press the REV INDEX
Key to position the Car-
riage on the line where
the correction is to be
made.
Use the Space Bar, the
BACK SPACE Key, the
TAB Key, or the MICRO
SPACE Key to move the
Carriage to the position of
the character to be cor-
rected.
Press the {*) Key and
then the key of the char-
acter to be deleted, the
respective character will
be deleted.
4 Type the correct charac-
ter.
By pressing the QUICK ERASE Key when the
Carriage or cursor is in the middle of a word, the
characters to the left of the current position will be
corrected.
Move the Carriage to the
position of the last charac-
ter which was typed to
continue typing.
To manually erase a character printed in the "PS"
pitch, first align the Carriage with the character using
the MICRO SPACE Key.
r ^ l