Advertisement
Chapter
1
f. How to copy text to a new file
This function allows you to copy a text to a new file
name. This is useful when you wish to make changes
to a text but also wish to keep the original contents of
the text memorized.
TEXT
IN/OUT
Press the TEXT IN/OUT
Key to put the unit into
the Text Memory Mode.
Then input the file name
to be copied and press the
RETURN Key to put the
unit into the Text Edit
Mode.
g.
How to move, delete, or
copy a block
You can move, delete or copy a block of a text easily
by using the BLOCK Key as follows.
TEXT
IN/OUT
Press the TEXT IN/OUT
Key to put the unit into
the Text Memory Mode.
Then input the file name,
and press the RETURN
Key to put the unit into
the Text Edit Mode.
TEXT MEMORY MODE
FILE NAME
=
(FWD FOR LIST)
FILE NAME
=LETTER1_
LETTERlS+WMay 5, 19864
COPY
2
Press the COPY Key.
The
following
message
will appear on the LCD
Display.
HEW FILE NAME=
3
Input the new file name.
NEW FILE NAME=LETTER2_
4
Press the RETURN Key.
The text will be copied to
the next file, then the unit
will leave the Text Mode.
TEXT MEMORY MODE END
•
If a text file with the same name as the new file
already exists, the following message will appear on
the LCD Display.
ALREADY EXISTS
•
If the COPY Key is inadvertently pressed, press it
once again to cancel the key input.
TEXT MEMORY MODE
FILE NAME
=
(FWD FOR LIST)
FILE NAME
=BL0CK_
BL0CKS*Noi.,i
s the tine for all 9
F W D
?
BACK
SPACE
k
2
Using the FWD Key or
BACK SPACE Key, move
the cursor to the first
character of the
block
which is to be moved,
deleted or copied.
BLOCKS•Mow is the tine for all 9
BLOCK
Press the BLOCK Key.
The " Q " mark which in-
dicates the beginning of
the block will appear at
the left of the cursor in
the text displayed on the
LCD Display.
BLOCKS*Hoy is Dthe tine for all
Advertisement
Chapters
