Advertisement
Chapter
1
m.
Decimal Tab
When the TAB Key is pressed while pressing the
CODE Key, the decimal points can be aligned at the
set tab position.
Example:
•Operation
First, set a tab at the
position where the decim-
al point is to be printed.
Press the RETURN Key,
the
RELOC. EXPRESS
Key and CODE Key, or
the BACK SPACE Key to
return the Carriage. Press
the TAB Key while press-
ing the CODE Key. This
will move the Carriage to
the position where the de-
cimal
point
will
be
printed.
The
following
will appear on the LCD
Display to indicate the
unit is waiting for input.
DECIMAL TAB
Enter the integral part of
the number.
The entered number is
displayed on the
LCD
Display.
When the decimal point
(period) is entered, print-
ing will be executed so
that the decimal point is
printed at the tab posi-
tion.
D
Type the decimal portion
of your input.
•
Repeat the above steps (2 to 5) to type lists of
statistics.
Tab position
i
3,220;1
217)31
116;0
• When the number is only an integral part and there
is no decimal point, use the TAB Key, the RETURN
Key, or the TAB Key and CODE Key simultaneous-
ly for printing.
• When a large number of characters is to be entered
and any further entry will go beyond the left margin
or will be superimposed over already printed
characters, the buzzer sounds and character input is
no longer accepted.
•To cancel the Decimal Tab Mode, press the
Key
and then press the REPEAT Key to delete all the
entered characters until the buzzer sounds. Then
press the ^x] Key again.
Advertisement
Chapters
