Advertisement
DESCRIPTION OF
FUNCTIONS
Justify (JUST) Printing Mode
This mode will print each line so that the first
character is printed on the left margin and the last
character is printed on the right margin.
Display (at this time the characters can be edited
before they are printed).
When further input will exceed the right margin the
characters will be printed on the paper.
For this reason, you need only press the RETURN
Key when you wish to end the paragraph.
If the RETURN Key is pressed, the characters typed
up to that point will be printed without being justified.
•Justified
printing will start only when the cursor is at
the last character position on a line.
• I n
the Justify Printing Mode, the Carriage Return
Mode setting is irrelevant.
Editing (Insertion, Deletion) on the
LCD Display
The following procedure is for the case when
"Panasonic typewriter" has been entered and then it
is decided to change "typewriter" to "Typewriter".
1
Enter
P a n a s o n i c
| SPACE] t y p e w r i t e r
F'anason i c typewr i ier
Cursor
BACK
SPACE
*
Press the BACK SPACE
Key 10 times to bring the
cursor under the letter
" t " .
F'anason i c typewr i ter
3
Press the <x) Key to de-
lete the letter " t " .
Panasonic ypewriter
FWD
T
4
Press the
bring the
neath the
FWD Key to
cursor under-
letter "y".
F'anason i c ypewr i ter
SHIFT
5
Press the SHIFT Key and
the T Key to insert the
letter " T " .
T
I M P R E S S
F'anason i c Typewr i ter
If the operation is interrupted and/or the buzzer
sounds continuously, turn the unit off and then on. If
the unit does not return to normal operation and/or
the buzzer still sounds, check to see if the Ribbon
Cassette or the Correction Tape has reached its end.
RELOC
EXPRESS
6
When the RELOC Key is
pressed, the cursor will
move to the end of the
display, and further input
becomes possible.
F'anason i c Typewr i ier_
f^l
Advertisement
Chapters
