Table of Contents
Advertisement
If there is a problem, the oven will automatically suspend all oven functions and either the
or
TEMPERATURE
Do not turn off the mains power supply to the oven (wall switch) if you get an alert
unless the instructions in the chart following instruct you to. There are cooling fans within
the oven which are needed to cool the oven's components. Turning off the power while
the oven is too hot may damage the oven and its surrounding cabinetry.
What to do if an alert is displayed
1 Make a note of the alert displayed. You may need this information.
2 If you can fix the problem and the alert code does not reappear, you may continue
using your oven.
If you can't fix the problem yourself or the alert reappears and the problem persists: wait
until the cooling fans have stopped and the oven has completely cooled down, then turn
the power to the oven off at the wall and contact a Fisher & Paykel trained and supported
service technician or Customer Care with the alert code information.
ALERT
The
OVEN MODE
is flashing red
The
TEMPERATURE
dial is flashing red
The
OVEN MODE
is flashing white
40
dial will flash.
OVEN MODE
POSSIBLE CAUSES
Electronics fault
dial
Electronics fault
Technical fault
dial
ALERT CODES
WHAT TO DO
•
Allow the oven to cool down.
•
Once the oven has cooled completely,
disconnect and reconnect the power supply
•
If the alert reappears, contact a
Fisher & Paykel trained and supported service
technician or Customer Care.
•
Allow the oven to cool down.
•
Once the oven has cooled completely,
disconnect and reconnect the power supply
•
If the alert reappears, contact a
Fisher & Paykel trained and supported service
technician or Customer Care.
•
Contact a Fisher & Paykel trained and
supported service technician or Customer
Care.
Advertisement
Table of Contents
