Shelving/Pilaster Installation - Operation - True TR1RRI-1S Installation Manual

INSTALLATION / OPERATION INSTRUCTIONS
The package containing the pilasters will have the same serial number as cooler. Please check to make sure
these serial numbers are the same. Please see pages 14-15 on shelving diagrams for your specific model.
PILASTER INSTALLATION & OPERATION
True TR,TA, and TG cabinets are available with four
different shelving / tray slide options.
Type Kit #1. Angle Type Tray Slide
Type Kit #2. Rod Style Tray Slide
Type Kit #3. Universal Tray Slide
Type Kit #4. Chrome Shelves & Shelf Supports
Required Tools:
Standard Screwdriver (Flathead)
Rubber / Plastic Mallet
Tape Measure
Type Kit #4 Chrome Shelves or PVC Coated Shelves
1
2
3
10
10
INSTALLATION / OPERATION INSTRUCTIONS
White plastic
plugs go into
the threaded
holes when
they are not
used by the dif-
ferent shelving
systems. (not
available in
heated cabinets)
............ www.truemfg.com ............
............ www.truemfg.com ............
True Food Service Equipment, Inc.
True Food Service Equipment, Inc.
Note:
Installation Procedures (Wire Shelves):
Chrome, Stainless, or PVC coated wire shelves come
with knob style shelf supports (image 1) and plastic
plugs (image 3). Note that heated cabinets use
shelf standards (see page 13).
Screw in the knob style shelf supports in the
desired height (remember all supports will need to
be installed at the same height to keep the shelf
level.
Once the shelves are installed plug the remaining
threaded holes with the plastic plugs provided
(see image 3).
Pilaster Installation
(Side Wall of
Cabinet)
4
Pilaster Installation
Two and Three
Door Models
(Middle of Wall in
Rear of Cabinet)
5
Pilaster Installation
(Back Wall of
Cabinet / Two &
Three Door
Models)
6
10
10