SHELVING INSTALLATION / OPERATION
REQUIRED TOOLS:
• Tray Slide
Position tray slide to align front to back (level)
with rectangular hole of the standard posts.
Make sure tabs on the back-side of the tray slide
are facing down. Push in and slide down on
both ends so tabs are in the locked position.
(See figure 1).
Make sure that pan slide is level front to back
within the refrigerator or freezer.
Repeat procedure with remaining tray slides.
Figure 2 illustrates correct installation of tray slide.
8
INSTALLATION / OPERATION INSTRUCTIONS
Step 1
Note
Step 2
Note
Tray Slide
............ www.truemfg.com ............
True Food Service Equipment, Inc.
Tray
Slide
Figure 1
Figure 2
8