True TR1RRI-1S Installation Manual page 14

INSTALLATION / OPERATION INSTRUCTIONS
INSTALLATION / OPERATION INSTRUCTIONS
HEATED CABINET SHELVING INSTALLATION/
OPERATION
SHELF INSTALLATION:
A. Hook shelf clips onto shelf standards.
B. Position all four shelf clips equal in distance
from the floor for flat shelves.
C. Shelves are oriented so that cross support bars
are facing down.
D. Place shelves on shelf clips making sure all cor-
ners are seated properly.
Shelf
Shelf
Clip
Image 1
12
12
............ www.truemfg.com ............
............ www.truemfg.com ............
True Food Service Equipment, Inc.
True Food Service Equipment, Inc.
INSTALLING SHELF STANDARDS IN
HEATED CABINETS:
A. When installing shelf standards make sure the
numbers on the standards are facing up. These
numbers help with installing shelf clips at a level
height.
B. All standards are installed in the upper most
threaded hole near the ceiling of the cabinet. This
will leave a threaded hole vacant below each shelf
standard. A plastic plug is provided to cover the
open threaded slot.
Thumb
Screw
Shelf
Standards
Shelf
(See Image 2)
Thumb
Screw
Shelf
Standards
Image 2
12
12