Adjusting The Handle Height - Toro Recycler 20337 Operator's Manual

Adjusting the Handle
Height
You can raise or lower the handle in 1 of 2 positions
that is more comfortable for you
1. Loosen both handle knobs until you can push
the square edges of the carriage bolts out of the
square holes in the handle brackets.
2. Push the knobs until they are loose.
3. Move the handle to the upper or lower height
position.
4. Pull the knobs until the square edges of each
carriage bolt fits into its related square hole.
5. Tighten the handle knobs as tight as you can.
(Figure 11).
Figure 11
g032867
10