Table Of Contents - Toro Recycler 20337 Operator's Manual

Safety and Instructional Decals .......................... 3
Setup ........................................................................ 5
1 Assembling and Unfolding the Handle.............. 5
2 Installing the Recoil-starter Rope in the
Rope Guide..................................................... 5
3 Filling the Engine with Oil ................................. 7
4 Assembling the Grass Bag............................... 7
Product Overview ..................................................... 8
Operation .................................................................. 8
Before Operation ................................................... 8
Before Operation Safety ..................................... 8
Filling the Fuel Tank ............................................ 9
Checking the Engine-Oil Level............................ 9
Adjusting the Handle Height ............................. 10
Adjusting the Cutting Height ..............................11
During Operation ..................................................11
During Operation Safety ....................................11
Starting the Engine ........................................... 12
Using the Self-Propel Drive............................... 12
Shutting Off the Engine..................................... 12
Recycling the Clippings .................................... 12
Bagging the Clippings....................................... 13
Operating the Bag-on-Demand Lever ............... 13
Side-Discharging the Clippings......................... 14
Operating Tips ................................................. 15
After Operation .................................................... 16
After Operation Safety ...................................... 16
Cleaning under the Machine ............................. 16
Folding the Handle ........................................... 17
Maintenance ........................................................... 18
Recommended Maintenance Schedule(s) ........... 18
Maintenance Safety.......................................... 18
Preparing for Maintenance ............................... 18
Servicing the Air Filter....................................... 19
Changing the Engine Oil ................................... 19
Replacing the Blade.......................................... 20
Adjusting the Self-Propel Drive ......................... 21
Storage ................................................................... 22
Preparing the Machine for Storage ................... 22
Removing the Machine from Storage ................ 22
Safety
This machine has been designed in accordance with
ANSI B71.1-2012.
General Safety
This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read, understand, and follow the instructions
and warnings in this Operator's Manual and on
the machine and attachments before starting the
engine.
•
Do not put your hands or feet near moving parts of
or under the machine. Keep clear of any discharge
opening.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep bystanders and children a safe distance
away from the machine. Do not allow children to
operate the machine. Allow only people who are
responsible, trained, familiar with the instructions,
and physically capable to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this manual.
2