Table of Contents
Advertisement
7. Set the RF Channel Select Switch on the RF Con-
verter Unit to "CH3" or "CH4" to match the chan-
nel selector on your TV
.
This is the Video Camera
l
Recorder channel on your TV
set.
Your TV receiver
must be tuned to this channel any time a video
cassette is played back on the Video Camera
l
Recorder.
RF Channel Select Switch
"VTR/TV" Select Switch
8.
Set "VTR/TV" Select Switch on the RF Converter
Unit to "VTR".
9.
Slide "EJECT" Button on the Video Camera
l
Recorder and then insert the cassette.
10. Set "VTR/CAMERA" Select Switch to "VTR"
position.
11. Set "POWER"
ON/OFF
Switch on
.
12. Press "PLAY" Button
.
13. After playing press "STOP" Button.
"EJECT" Button
"VTR/CAMERA" Select Switch
"POWER" ON/OFF Switch
"STOP" Button
NOTE:
If you want to watch a TV program with Video Camera
/
Recorder connected as illustrated in example 1
on page 21, set "VTR/TV" Select Switch on the RF Converter Unit to "TV" position.
Example 2: If your TV has "VIDEO IN" and "AUDIO IN" jacks, you may use either RF Converter Unit (Ac-
cessory No.2) or Audio/Video Output Cable (Optional).
D
Audio/Video Output Cable
(Optional)
To
+t
"VIDEO IN"
To
To "VIDEO IN"
~
~
To "AUDIO IN"
"AUDIO IN"
Audio/Video
Cable (Optional)
Using RF Converter unit
OR
1. Connect "VIDEO OUT" and "AUDIO OUT" of RF
Converter Unit to "VIDEO IN" and "AUDIO IN" of
TV using the optional cables.
2. Connect the Connector Cable from RF Converter
Unit to "A/V" jack on the Video Camera
/ Recorder.
3.
Perform same procedures in Steps 9 through 13 of
"Example 1" above
.
To "VIDEO OUT"
and "AUDIO OUT"
Using Audio/Video Output Cable
1. Connect the Audio
/
Video Output Cable (Optional) to
"AUDIO IN" and "VIDEO IN" of your
n/.
2. Connect the other end of the Audio
/
Video Output
Cable to "A/V" of your Video Camera
l
Recorder.
3. Perform same procedures in Steps 9 through 13 of
"Example 1" above.
22
Advertisement
Table of Contents
