Table of Contents
Advertisement
Disassembly
Removing the Keyboard
Figure 12
Keyboard Removal
1. Turn off the computer, and remove the battery
2. Remove screws
a. Remove screws from the
bottom of the computer.
(you may need to use the Eject Pin Tool to do this
Press at points
3
to un-
3. Remove the LED cover module
snap the LED cover
4. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable
module.
ribbon cable
b. Remove the LED cover
5. Carefully lift up the keyboard
module
and
screws
from the keyboard.
c. Carefully lift the key-
a.
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
d. Remove the keyboard.
Re-Inserting the
Keyboard
b.
When re-inserting the
keyboard firstly align the
four keyboard tabs at the
bottom
(Figure
12c) at
the bottom of the key-
board with the slots in the
case.
4. LED Cover Module
12. Keyboard
• 7 Screws
2 - 16
-
from the bottom of the computer. Press at points
1
2
and screws
4
from the locking collar socket
10
(Figure
12d) off the computer.
12
3
1
2
7
5
6
8
4
(page 2 -
5).
to unsnap the LED cover module
3
(Figure
12a).
-
from the keyboard
(Figure
5
9
(Figure
12c)
11
c.
3
d.
9
Keyboard Tabs
4
12b).
. Disconnect the keyboard
10
10
11
12
Advertisement
Table of Contents
