Removing The 3.75G Module - Clevo W251ELQ Service Manual

Disassembly

Removing the 3.75G Module

Figure 10
3G Module Removal
1. Turn off the computer, turn it over, and remove the battery
2. Carefully disconnect the cable
a. Disconnect the cable
3. The 3.75G module
and remove the screw.
b. The module will pop-up.
c. Remove the 3.75G mod-
ule. a.
Note: Make sure you
reconnect the antenna
cable to socket.
b.

3. 3.75G Module
• 1 Screw
2 - 14 Removing the 3.75G Module
, then remove the screw
1
(Figure 10b) will pop-up, and you can remove it from the computer
4
1
2
d.
3
(page 2 - 5) and the component bay cover
from the module socket.
2
(Figure
c.
3
(page 2 - 9).
10c).