Removing The Wireless Lan Module - Clevo W251ELQ Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, turn it over, and remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
4. The Wireless LAN module
4
a.
1
b.
4
3
2
(page 2 -
on the mainboard
1
- , and then remove the screw
2 3
(Figure 11c) will pop-up, and you can remove it from the computer.
c.
5) and the component bay cover
(Figure 11a).
(Figure 11b) .
4
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 11
Wireless LAN
(page 2 - 9).
Module Removal
a. Locate the WLAN.
b. Disconnect the
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
5
cable to the "1 + 2"
socket (Figure 11b).

4.Wireless LAN Module
• 2 Screw
cable