Sony SLV-D100 Operating Instructions Manual page 89

Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHFfUHF antenna, use the EAC-32 antenna
connector (not supplied) to connect the
antenna to the DVD-VCR.
300-ohm twin
lead cable
EAC-32 antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
300-ohm twin
a 300*ohm twin lead cable for a VHF/UHF "_11
antenna, use the EAC-66 UHF/VHF band %_l°ad cablo
separator/mixer (not supplied) to connect the
antenna to the DVD-VCR.
75-ohm coaxial .--_
cable
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
Connect the 75*ohm coaxial cable to the mixer.
EAC-66
UHFNHF
band
separator/
mixer (not
supplied)
=_
3
o
General setup information
89