Sony SLV-D100 Operating Instructions Manual page 50

Press _/,1_ to select the setup item from the displayed list:
"Dolby Digital," "DTS," or "Audio DRC."
5
Press 4,/,_. to select an item, then press _ RETURN to confirm the setting.
RETURN
(_ Press oJ% RETURN repeatedly to exit the menu.
RETURN
Menu choices
• Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM Select this when the player is connected to _n audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• DTS (DVD only)
Selects whether or not to output DTS signals.
The default setting is indicated in hold print.
Off Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On Select this when the player is connected to an audio component
with a built-in DTS decoder.
• Audio DRC (Dynamic Range Control) (DVD only)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC" This afl'ects the output from the following jacks:
LINE OUT AUDIO L/R jacks
DIGITAL AUDIO OUT (OPTICAL or COAXIAL)jack only when "Dolby
Digital" is set to "D-PCM".
The default setting is indicated in bold print.
Standard
M_k":]i;lYeSl_:w_'_o*_il[d_c_'ea_"even if you tun1 the volume down.
TV Mode
50 Audio Setup