Operation
(when recording
on this VCR)
Before you start editing
• Turn on the VCR and the TV and set
it to the video channel.
• Press INPUT SELECT or CH +/- to
display "LINE 1" or "LINE 2" in the
display window.
• Press SP/EP to select the tape speed,
SP or EE
I
II PAUSE
• REC
insert a source
tape with its safety tab removed
into the other (playback)
VCR.
Search
for the point to start playback
and set it to playback
pause.
insert a tape into this (recording)
VCR.
Search
for the point to start recording
and press II PAUSE.
Press •
REC on this VCR to set it to recording
pause.
To start editing,
press the II PAUSE buttons
on both VCRs at the same time.
To stop editing
Press the • STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press II PAUSE on this VCR when an unwanted
scene begins. When it ends, press II PAUSE again to resume recording.
86
Editing with anotherVCR