Sony SLV-D100 Operating Instructions Manual page 39

To watch another TV program while recording
Press TV/VIDEO to display "TV" in the display window.
Tit
I ',1 0
2 If your TV is connected to the VCR using A/V connections, set the TV to the
TV's antenna input; if not, skip this step.
Select another channel on the TV.
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
Press _ and place the disc on the disc tray.
3 Press li> PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
To save a recording
To prevent accidental erasure, break
offthe safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
• To select a channel, you can use the
J(_ Safety ta b
number buttons on the remote commander. Enter the channel number, then press ENTER.
• You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
• The display appears on the TV screen indicating inlbrmation about the tape, but the
inlbrmation will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When using a cable
box, make sure to leave it on.
Notes
• The remaining tape length may not be indicated accurately lbr sho_t tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute lbr eqe VCR to calculate and display the remaining tape length
aider you press DISPLAY.
• You cannot record a DVD to a VCR tape.
• To watch a TV program during video recording, stop disc playback.
g_
co
¢1
O
¢0
p,
o
Recording TV programs
39