Pioneer SX-P920 Operating Instructions Manual page 41

Stereo receiver ampli-syntoniseur stereo / sound field processor processeur de champ sonore / sound image controller controle de relief sonore /stereo double cassette deck double platine cassette stereo /speaker system systeme d'enceintes
Table of Contents

Advertisement

BASIC OPERATIONS
OPERATIONS DE BASE
CASSETTE DECK OPERATIONS
|
| UTILISATION
DE LA PLATINE
ss?
YSLSSN
DOLBY NR
TAPE
PLAY
Tapes may be played back in Deck | or Deck I] but not
in
©
6.
both decks at the same time.
The accompanying illustration shows the buttons for
the SX-P920
remote control unit. The SX-P720 re-
mote control unit can be used as well for commands
using corresponding buttons.
Items including the [ [| ] mark can be performed us-
ing the remote control unit.
. Press the EJECT button, and load a recorded
tape.
. Select the REV MODE
switch
a=:
One-sided play.
=>
: To play both sides of a tape.
ec:
Up to 16 tape sides will be played.
. Set the DOLBY NR switch to the same position
used for recording.
. Press the play button (P or <4).
Press play button of the loaded deck.
®:
Forward playback.
€:
Reverse playback.
. Adjust the VOLUME control on the receiver and
the tone with the sound field processor (or the
sound image controller).
To stop playback, press the stop button ( @).
Auto Stop Mechanism
The mechanism stops automatically when the end of tape
is reached.
|
Gr 256
.)6-
SX-P920
—=
=
VOLUME
Eh
LECTURE
D'UNE
BANDE
Des bandes peuvent étre reproduites dans la Platine | ou
la Platine Il mais pas dans les deux platines en méme
temps.
®
L'illustration jointe indique les touches pour l'unité de
télécommande
SX-P920.
L'unité de télécommande
SX-P720 peut aussi étre utilisée pour les commandes
utilisant les touches correspondantes.
=
®@ Les opérations accompagnées de la marque [ [] ] peu-
vent
étre
effectuées
en
utilisant
l'unité
de télé-
commande.
1. Appuyer
sur la touche
d'éjection
(EJECT)
et
charger une bande enregistrée.
2. Sélectionner le commutateur de mode d'inver-
sion ney MODE).
==
: Pour la reproduction d'une face
=>
: Pour
la reproduction
des deux
cétés
d'une
bande.
ea
: Jusqu'a 16 faces de bande seront reproduites.
3. Régler le commutateur DOLBY NR sur la méme
position que celle utilisée pour l'enregistrement.
4. Appuyer sur la touche de reproduction (P ou
4).
Appuyer sur la touche de reproduction de la platine
dans laquelle la cassette a été chargée.
®: Reproduction vers l'avant
<4: Reproduction vers |'arriére
41
<ARE1211>
En/Fr

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents