Configuring A Line Key Using The Mitel Web Ui; Speed Dial Key - Mitel 6920w User Manual

C S
ONFIGURING OFTKEYS
The Line 1 and Line 2 softkeys are autoconfigured in the 6920 SIP Phone due to the absence of Line 1
and Line 2 hardkeys. By default, the line values for top softkey 1 and top softkey 2 are set to Line 1 and
Line 2 in the WebUI.
You can set a softkey to act as a line/call appearance key on the 6920.

Configuring a Line Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 20 on the top keys.
2.
In the Type field, select Line to apply to the key.
3.
In the Label field, enter a label to apply to this key.
4.
In the Line field, select a line to apply to this key. Valid values are 1through 24.
5.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
6.
In the Line field, select a line to apply to this key. Valid values are 1through 24.
7.
Click Save Settings.
8.

Speed Dial Key

The normal function of the speed dial option allows you to dial a number quickly by pressing a key config-
ured for speed dialing. You can program the keys on the 6920 to speed dial outside numbers, dial directly
to another person's line or extension, or quickly access features such as Caller ID (*69) and voicemail.
: You can use a Speed Dial key while on an active call by placing the active call on hold first, and
NOTE
then pressing the speed dial key.
You can create Speed Dial keys using any of the following methods:
Using the Mitel Web UI at the paths:
•
Operation > Softkeys and XML.
•
Operation > Expansion Module Keys.
•
Using the IP phone UI at the path Options > Dialing > Speed Dial Edit.
•
By pressing and holding a softkey, dialpad key, or expansion module key.
•
S D K
PEED IAL EY
79