Enabling Bluetooth Functionality - Mitel 6920w User Manual

C
USTOMIZING YOUR PHONE
The 6920w IP phone supports the use of a Bluetooth headset as an alternate audio device. Using the
Bluetooth settings menu, you can enable and disable Bluetooth functionality on your phone as required.
You can also pair, connect, and disconnect a Bluetooth device as applicable.
:
NOTE
The specific operation of third-party Bluetooth devices can vary by manufacturer and model. Ensure
1.
your Bluetooth device has been upgraded to its latest firmware revision. Refer to the documentation
accompanying the Bluetooth device for details on operation, alerting tones, LEDs, and charging. Note
that all Bluetooth devices will drop any call in progress if the maximum range is exceeded.
Attempting to pair and connect using your Bluetooth device's respective menus may cause connec-
2.
tivity issues. Follow the procedures listed in the sections below to ensure the connectivity of your Blue-
tooth device.
Only one Bluetooth device can be connected at one time. Connecting to a new device will automati-
3.
cally result in the disconnection of the previous device. If there is no connection to any device the
phone will actively look for the most recently connected device and will attempt to automatically recon-
nect. Manually disconnecting the device using the device's native UI will not prevent an automatic
reconnection. You must either disconnect using the Bluetooth menu on the Mitel 6920 SIP IP phone,
Forget the device, or the device must be out of range to circumvent the auto reconnect process.
When using a multi-point Bluetooth headset with your Mitel 6920 SIP IP phone, do not pair your
4.
multi-point Bluetooth headset to multiple devices as audio and connectivity issues may occur.
Some Bluetooth headsets have a proximity sensor feature that automatically changes the audio path
5.
depending on whether the headset is put on or taken off. It is strongly recommended to disable this
feature when using the respective headset with the Mitel 6920 SIP IP phone as it may cause audio
issues. Refer to the documentation accompanying the Bluetooth device for information on how to
disable this feature.
Bluetooth headsets connected to the Mitel 6920 SIP IP phone are limited in functionality to answering,
6.
ending, and muting calls. Additional headset features (such as rejecting calls) are not supported and
will cause unexpected behavior (e.g. invoking the reject call function will answer instead of reject).
Paring to a cordless handset is not supported on the 6920w IP Phone.
7.

Enabling Bluetooth functionality

To enable Bluetooth functionality:
(Options) key on the phone to enter the Settings menu.
Press the
1.
Navigate to the Bluetooth setting and press the Select button or Select softkey.
2.
B
LUETOOTH
67