Table of Contents
Advertisement
PAGE
8
WEIDER SPORTING GOODS
STEP
4
ADJUSTABLE
UPRIGHT
ASSEMBLY
[64 LOCKING EIN: SMALL
[O insert the ADJUSTABLE UPRIGHT (24)
into the UPRIGHT (1).
QO
oooo]J
L] Use LOCKING PINS - SMALL (64) to
adjust the height of the ADJUSTABLE
UPRIGHTS (24).
[J Press a 3/4" ROUND
PLASTIC
INSERT
CAP
(58)
into the
handle
end
of the
25
BACKREST
ADJ
BAR
(25).
Slide the
Backrest
Adj Bar into any of the hole 58
patterns on the UPRIGHT (1). This Bar is
used to adjust the incline of the BACKREST
(4) and the height of the ADJUSTABLE
UPRIGHTS (24) when using the Backrest in
jns
о
ап incline position.
When the Backrest is іп
the flat position, the height of the Adjustable
Uprights can be adjusted by the use of the
LOCKING PINS - SMALL (64).
STEPS
ARM
CURL ASSEMBLY
26
41
1/4" X 3/4" ROUND HEAD MACHINE SCREW
[З Assemble
the
ARM
CURL
PAD
(26) to
the PAD
SUPPORT
(27) using 1/4" X 3/4"
ROUND
HEAD
MACHINE
SCREWS
(41) to bolt through
és
the Support and into
27
the Pad.
ў
L] To use the Ат
Curl
Pad, insert the PAD
SUPPORT
(27) into
the top of the MAIN
FRAME (8) and adjust
to the desired height
by
inserting
a
LOCKING
PIN
-
SMALL
(64) into the
appropriate hole and
allowing it to rest on
top
of
the
Frame.
(You will need to use
one
of the
Locking
Pins
from
the
Adjustable Uprights.)
Advertisement
Table of Contents
