Base Frame Assembly - Weider FLEX XT2 Owner's Manual

STEP 1 BASE FRAME ASSEMBLY
20 5/16" X 3 1/2" HEX HEAD BOLT ——
[21 5/16" FLAT WASHER
[22 5/16" NYLON LOCK NUT ——
[34 1 1⁄2" SQUARE RUBBER FEET
(О Begin by inserting 1 1/2" X 3" RUBBER FEET (35)
onto the ends of the Base of the MAIN FRAME (1).
[C] Press 1 1/2" SQUARE RUBBER FEET (34) onto
each end of the REAR BASE (2).
LJ Assemble 5/16" FLAT WASHERS (21) onto two
5/16" X 3 1/2" HEX HEAD BOLTS (20) and attach
the MAIN FRAME (1) to the REAR BASE (2) by
bolting through the Main Frame and then through the
brackets of the REAR BASE (2). Secure with 5/16"
NYLON LOCK NUTS (22).