Table of Contents
Advertisement
_ WEIDER HEALTH and FITNESS
STEP 1
BASE
FRAME
ASSEMBLY
60 5/16" X 2 1/4" HEX HEAD BOLT
| 4 |
71 8/16" NYLON LOCK NUT
| «4 |
95 2" SQUARE PLASTIC COVER CAP
| 3 |
Cl Begin by capping each tubing end of the
REAR
BASE
(2) with 2"
SQUARE
PLASTIC COVER CAPS (95).
L] сар the end of the BASE "Т" (1) with a
2" SQUARE PLASTIC COVER CAP (95).
C] Orient the Base *T* and the Rear Base so
that the dimpled-in holes are faced to the
floor.
L] Assemble the BASE "T" to the REAR
BASE (2) by,boltíog with 5/16" X 2-1/4*.
HEX HEAD BOLTS (60) up through the
bottom of the Rear Base, then through the
Base
"Т.
Secure
with 5/16"
NYLON
LOCK NUTS (71).
C то the BASE "T" (1), assemble the
STEPPER FRAME UPRIGHT (3) so that
the bracket welded to the Upright Is to the
bottom and aligned rearward. Attach with
5/16* X 2 1⁄4" HEX HEAD BOLTS (60)
by bolting up through the bottom of the
BASE
'T*
(1) and
then
through
the
welded brackets on the Upright.
Secure
with 5/16" NYLON LOCK NUTS (71).
Advertisement
Table of Contents
