Step 2: Connecting The System ,,,22 - Sony BDV-E870 Operating Instructions Manual

Step 2: Connecting the System
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are lilade.
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to (_, and the speaker cord without the color tube to G. Do not catch the speaker cord
insulation (robber covering) in the speaker terminals.
To connect speaker cords to the unit
When connecting to the unit, insert the connector until it clicks.
Rear panel of the unit
G ray
(Surround right speaker (R))
Red
(Front right Purple
speaker (R)) (Subwoofer)
White
(Front left speaker (L))
Blue
(Surround left speaker (L))
Green
(Center speaker)
To connect speaker cords to the speaker
Color tube
ector (-)
Rear or bottom of the speaker
22us